Latest Products & Releases - You'll See It Here First!

New From Permagrit Tools

Permagrit's new Wedge BlockWedge Block
The Aluminium Extrusion used to make this sanding block has been cut at a 45 angle instead of the usual 90. The block still has both coarse (180 grit) and fine (320 grit) Permagrit sheets applied, but can now be used to sand into corners that are less than 90. The grits extends to the extreme end of the blocks, enabling them to reach right into the edge of corners. As with all Permagrit tools, any paint, glue or residue can easily be removed using a solvent or paint stripper.
Price: 12.50 inc VAT

Large Needle File Handle
A handle is now available for the much larger 18cms long needle files. This has a brass collet which accepts these 5mm diameter files. Notice the handle is triangular in section, this prevents it rolling off the workbench!! Price 2.99.

Other Products
Permagrit Tools also make Tungsten Carbide products to fit electric sanders, jigsaws, holesaws, sanding discs, and air tools.

All products can be seen and ordered on their secure website

Freephone Permagrit tools on 0800 2985121 for free brochure.

Please mention 'Flying Sites' when contacting
Permagrit Tools.